Illustration of a modern great room at golden hour with tall glass and a linear air diffuser

AC installation · Right Sized Design

AC installation and replacement in DFW (Dallas-Fort Worth)

A new AC should cool every room evenly, run quietly and get through a North Texas summer without cutting on and off. We get there by sizing the system to your house, room by room, instead of copying the label on the old unit. Texas AirZone has installed AC across the Metroplex since 1997. You get one written, fixed-price proposal before any work is scheduled, and our own team does the installation.

Holding another contractor's replacement proposal? Ask us for a second opinion before you sign.

Serving DFW since 1997
Right Sized Design
Fixed-price written proposals
Our own install team
Illustration of a media lounge with walnut millwork, warm lighting and a linear air diffuser

Discipline No. 01 · Air

Sized for your house, not the old label

Match the old unit's label and you inherit every sizing mistake made when it went in. With Right Sized Design, we start with a room-by-room load calculation: how your home gains heat, where it loses it, and what each room needs on a hot afternoon.

Then we check the ductwork. Even a correctly sized system falls short if the ducts cannot deliver the air, so we measure airflow and static pressure before we recommend equipment.

  • A room-by-room load calculation based on your windows, insulation, layout and how you use each space
  • Measured airflow and static pressure, with a written summary of the findings and next steps
  • Premium, field-proven equipment chosen for your home's measured load and comfort goals
Assess
Inspect the existing system
Explain
Review the proposed scope
Verify
Check operation after work
Book Now

Common sizing mistakes

When size is the only question, comfort suffers

We see the same mistakes again and again across the Metroplex. Each one comes from treating tonnage as the whole answer.

  • Sized for the hottest afternoon of the yearAn oversized system reaches the thermostat setting fast, then shuts off before it pulls moisture out of the air. The house reads 72 degrees and still feels damp.
  • The ductwork was never checkedWhere ducts have aged, sit in hard-to-reach spaces or have shifted with the structure, leaks cut the air that reaches your rooms. New equipment cannot fix that on its own.
  • One thermostat for two floorsIn two-story homes, the upstairs often runs warmer than the downstairs. A bigger unit does not solve it. Zoning or duct changes are where we look first.

Repair or replace

Signals that point to replacing your AC

Not every struggling AC needs to come out. These are the signals we walk through with you, and we explain the options and trade-offs before you decide.

  • Age and the size of the repairA major repair on an older system is worth comparing with a replacement before you commit to either.
  • Repair historyService calls every season, or the same failure coming back, point to a system that keeps costing you.
  • Comfort problemsRooms that never cool or humidity that lingers often trace back to sizing or ductwork, which a like-for-like swap will not fix.
  • Refrigerant typeSystems that use R-410A can still be serviced, so refrigerant alone is not a reason to replace.
  • Your plans for the homeHow long you expect to stay shapes how much a new system is worth to you.

Your proposal

Everything in writing before you commit

You see the full plan before anything is scheduled. Each proposal is one fixed project price, not an open-ended estimate.

01

Mechanical drawings and samples

Drawings of the proposed system and material samples, so you can see what goes into your home.

02

One fixed-price proposal

Scope, equipment selections, price, assumptions and the expected timeline, documented in one place.

03

A named installation team

The proposal names the team responsible for your project. We do our own installations and do not subcontract them.

Warranty coverage and financing apply to qualifying installations, and your proposal spells out the terms.

What to expect

Installation day and the walkthrough after

  • Before we arriveYour proposal confirms the scope, the team and the expected timeline for your project.
  • During the installOur own team installs the new system and protects your home and its finishes while they work.
  • Before we leaveWe test the system's operation to confirm it performs as designed.
  • The walkthroughWe review the completed work with you, along with your warranty and ongoing-care terms.

To keep the new system running well, Star Club Membership is our maintenance plan for your AC and heat.

Refrigerant rules

The refrigerant in a new system

Most new residential systems now use refrigerants with a lower global warming potential, such as R-454B or R-32. Federal rules restricted the manufacture and import of new higher-GWP residential split-system equipment starting January 1, 2025.

Your current R-410A system can still be serviced. Eligible equipment made before the cutoff may still be installed under current sell-through rules, and your proposal names the refrigerant your new system uses.

EPA Technology Transitions Program

Air Questions

Considered answers, clearly given.

Book Now

How do you decide what size AC my home needs?

We run a room-by-room load calculation as part of Right Sized Design. It accounts for your insulation, windows, layout and how you use each room, so the new system matches the house as it is today, not the size of the old unit.

Should I repair or replace my AC?

Weigh the system's age against the cost of the repair, then look at its repair history, any rooms that never cool and how long you plan to stay. We explain the options and trade-offs before asking you to decide on either one.

How is AC replacement priced?

Each replacement proposal is a fixed project price, not an open-ended estimate. It documents the scope, equipment selections and any assumptions, so you know exactly what you are approving before any installation work is scheduled at your home.

Who installs the new system?

Our own installation team does the work. We do not subcontract installations, and your written proposal names the team responsible for your project before anything is scheduled, so you know who will be working in your home.

What refrigerant will a new system use?

Most new residential systems use lower global warming potential refrigerants such as R-454B or R-32, depending on the equipment. If your current system uses R-410A, it can still be serviced, so refrigerant alone does not decide whether to replace it.

Can you review another contractor's replacement proposal?

Yes. We give second opinions on another contractor's diagnosis or replacement proposal. We look at the sizing, ductwork, scope and equipment so you can compare the recommendation with what your home actually needs before you commit.

Choose the next step

Understand the problem. Plan the right work.

Book a visit for a problem you have today, or tell us about a replacement or a duct, comfort or air project. We follow up to confirm the next step.

Book NowSee how we size a system

(469) 382-2701Mon to Fri, 7 AM to 6 PMSat and Sun, 8 AM to 12:30 PMEmergency service is available outside regular hours when needed.